Electrical splices adhesive lined Heat Shrink tube for automotiveDescriptionSBRS-VBK is a dual-wall, heat shrinkable tubing designed to provide moisture proof encapsulation of an electrical splice in an automotive environment. Moisture may enter a splice area directly or indirectly via a capillary action between individual wires, thus causing corrosion.The tubing is centered over the splice area and on heating the adhesive melts and is squeezed around where the wires are crimped or welded and between the conductors, by the shrinking action of the sleeve. The installed product provides low profile mechanical protection against flexing, abrasion and cut-through as well as electrical insulation. The jacket is flame-retarded.
FeaturesSemi rigidHigh performance adhesiveDesigned for wire harnesses/splicesExcellent mechanical propertiesOperating temp.: -35°C ~+125°CMin. shrink temp.: 110°CMin. fully recovery temp.: 135°CShrink ratio: 4:1RoHS compliantStandard color: Black .Clear (Non-Flame retardant)Technical Performance
Property | Typical Data | Test Method |
Tensile strength | ≥16MPa | ASTM D 2671 |
Ultimate elongation | ≥400% | ASTM D 2671 |
Heat ageing Tensile strength | ≥13MPa | 158ºC×168h |
Heat ageing Ultimate elongation | ≥300% | 158ºC×168h |
Longitudinal shrinkage | -8%~+8% | ASTM D 2671 |
Flammability | Self-extinguishing in 30 sec. | AMS-DTL-23053/4 |
Flammability | ≥20kV/mm | IEC 60243 |
Volume resistance | ≥1014Ω.cm | IEC 60093 |
Technical Performance of AdhesiveProperty | Typical Data | Test Method/Condition |
Softening point | 135±5ºC | ASTM E 28 |
Water absorption | <0.5% | ASTM D 570 |
Peel strength(PE) | ≥120N/25mm | ASTM D 1000 |
Peel strength(AI) | ≥80N/25mm | ASTM D 1000 |
DimensionsSize (mm) | As supplied (mm) | After recovered(mm) | Standard package |
Inside diameter (Max.) | Total Wall thickness (Min.)w1 | Adhesive Thickness (Nom.)w2 | (M/pcs) |
Φ6.0 | ≥6.0 | ≤1.27 | ≥1.30 | 0.56 | 1.22 |
Φ8.0 | ≥8.0 | ≤1.65 | ≥1.52 | 0.76 | 1.22 |
Φ12.0 | ≥12.0 | ≤2.41 | ≥1.91 | 1.02 | 1.22 |
Φ18.0 | ≥18.0 | ≤4.45 | ≥2.41 | 1.37 | 1.22 |
Packaging: Standard packaging on 1.22m.Other: Other cut lengths are available, please contact our sales department. Cross Reference:Volsun VBK 6/1.27 ===== Tyco RBK-ILS-125-NR1Volsun VBK 8/1.65 ===== Tyco RBK-ILS-125-NR2Volsun VBK 12/2.41===== Tyco RBK-ILS-125-NR3Volsun VBK 18/4.45===== Tyco RBK-ILS-125-NR4 Contact us if you need more details on Electrical Splices Adhesive Lined Heat Shrink T. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Automotiveadhesive Dual Wall Heat Tube、Waterproof Insulation Heat Shrinkable Tube. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Dual Wall Heat Shrink Tubing