Find Protective Sleeve, Plastic Protective Sleeve, Clear Protective Sleeve on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
New Products
| Min. Order: | 1 Meters |
|---|
| Properties | Typical Data | Test Method |
| Tensile strength(MPa) | ≥10.4 | ASTM D2671 |
| Elongation (%) | ≥200 | ASTM D2671 |
| Tensile strength after heat aging(MPa) | ≥7.3 | 158°C×168h |
| Elongation after heat aging(%) | ≥100 | 158°C×168h |
| Longitudinal change(%) | -5%~+5% | ASTM D 2671 |
| Flammability | VW-1 | ASTM D 2671 C |
| Voltage withstand(Rated voltage 600V) | 2500V,1min, without breakdown | UL224 |
| Heat shock | No cracking, no dripping | UL 224,250°C×4h |
| Dielectric strength | ≥15kv/mm | ASTM D 149 |
| Volume resistivity(Ω cm) | ≥1014Ω.cm | IEC 60093 |
| Size | Expanded Internal diameter(mm) | Recovered(mm) | Standard Package m/spool | |
| Internal diameter Max(mm) | Wall thickness(Min) | |||
| φ0.5/0.35 | 0.7±0.2 | ≤0.35 | 0.33±0.10 | 400 |
| φ0.6/0.40 | 0.9±0.2 | ≤0.40 | 0.33±0.10 | 400 |
| φ0.8/0.50 | 1.1±0.2 | ≤0.50 | 0.33±0.10 | 400 |
| φ1.0/0.65 | 1.5±0.2 | ≤0.65 | 0.36±0.10 | 400 |
| φ1.5/0.85 | 2.0±0.2 | ≤0.85 | 0.36±0.10 | 400 |
| φ2.0/1.00 | 2.5±0.2 | ≤1.00 | 0.45±0.10 | 400 |
| φ2.5/1.30 | 3.0±0.2 | ≤1.30 | 0.45±0.10 | 400 |
| φ3.0/1.50 | 3.5±0.2 | ≤1.50 | 0.45±0.10 | 400 |
| φ3.5/1.80 | 4.0±0.2 | ≤1.80 | 0.45±0.10 | 400 |
| φ4.0/2.00 | 4.5±0.2 | ≤2.00 | 0.45±0.10 | 400 |
| φ4.5/2.30 | 5.0±0.2 | ≤2.30 | 0.45±0.10 | 200 |
| φ5.0/2.50 | 5.5±0.2 | ≤2.50 | 0.56±0.10 | 200 |
| φ5.5/2.75 | 6.0±0.2 | ≤2.75 | 0.56±0.10 | 200 |
| φ6.0/3.00 | 6.5±0.2 | ≤3.00 | 0.56±0.10 | 200 |
| φ7.0/3.50 | 7.5±0.3 | ≤3.50 | 0.56±0.10 | 100 |
| φ8.0/0.40 | 8.5±0.3 | ≤4.00 | 0.56±0.10 | 100 |
| φ9.0/4.50 | 9.5±0.3 | ≤4.50 | 0.56±0.10 | 100 |
| φ10/5.00 | 10.5±0.3 | ≤5.00 | 0.56±0.10 | 100 |
| φ11/5.50 | 11.5±0.3 | ≤5.50 | 0.56±0.10 | 100 |
| φ12/6.00 | 12.5±0.3 | ≤6.00 | 0.56±0.10 | 100 |
| φ13/6.50 | 13.5±0.3 | ≤6.50 | 0.70±0.10 | 100 |
| φ14/7.00 | 14.5±0.3 | ≤7.00 | 0.70±0.10 | 100 |
| φ15/7.50 | 15.5±0.4 | ≤7.50 | 0.70±0.10 | 100 |
| φ16/8.00 | 16.5±0.4 | ≤8.00 | 0.70±0.10 | 100 |
| φ17/8.50 | 17.5±0.4 | ≤8.50 | 0.70±0.10 | 100 |
| φ18/9.00 | 19.0±0.5 | ≤9.00 | 0.70±0.10 | 100 |
| φ20/10.0 | 22.0±0.5 | ≤10.0 | 0.80±0.15 | 100 |
| φ22/11.0 | 24.0±0.5 | ≤11.0 | 0.80±0.15 | 100 |
| φ25/12.5 | 26.0±0.5 | ≤12.5 | 0.90±0.15 | 50 |
| φ28/14.0 | 29.0±0.5 | ≤14.0 | 0.90±0.15 | 50 |
| φ30/15.0 | 31.5±1.0 | ≤15.0 | 1.00±0.15 | 50 |
| φ35/17.5 | 36.5±1.0 | ≤17.5 | 1.00±0.15 | 50 |
| φ40/20.0 | 41.5±1.0 | ≤20.0 | 1.00±0.15 | 50 |
| φ50/25.0 | ≥50 | ≤25.0 | 1.10±0.15 | 25 |
| φ60/30.0 | ≥60 | ≤30.0 | 1.20±0.15 | 25 |
| φ70/35.0 | ≥70 | ≤35.0 | 1.30±0.20 | 25 |
| φ80/40.0 | ≥80 | ≤40.0 | 1.30±0.20 | 25 |
| φ90/45.0 | ≥90 | ≤45.0 | 1.30±0.20 | 25 |
| φ100/50.0 | ≥100 | ≤50.0 | 1.30±0.20 | 25 |
| φ120/60.0 | ≥120 | ≤60.0 | 1.30±0.20 | 25 |
| φ150/75.0 | ≥150 | ≤75.0 | 1.30±0.20 | 25 |
| φ180/90.0 | ≥180 | ≤90.0 | 1.30±0.20 | 25 |
| φ210/105.0 | ≥210 | ≤105.0 | 1.30±0.30 | 25 |
| φ230/115.0 | ≥230 | ≤115.0 | 1.30±0.30 | 25 |
| φ250/125.0 | ≥250 | ≤125.0 | 1.30±0.30 | 25 |
| Φ300/150.0 | ≥300 | ≤150.0 | 1.30±0.30 | 25 |
| Size | Expanded Internal diameter(mm) | Recovered(mm) | Standard Package m/spool | ||
| mm | Inch | Internal diameter Max(mm) | Wall thickness(Min) | ||
| φ1.5/0.5 | 1/16 | ≥1.50 | ≤0.5 | ≥0.45 | 200 |
| φ3.0/1.0 | 1/8 | ≥3.00 | ≤1.0 | ≥0.55 | 200 |
| φ4.5/1.5 | 3/6 | ≥4.50 | ≤1.5 | ≥0.60 | 100 |
| φ6.0/2.0 | 1/4 | ≥6.00 | ≤2.0 | ≥0.65 | 100 |
| Φ9/3 | 3/8 | ≥9.00 | ≥3.00 | ≥0.75 | 100 |
| φ12/4 | 1/2 | ≥12.00 | ≥4.00 | ≥0.80 | 50 |
| φ18/6 | 3/4 | ≥18.0 | ≤6.0 | ≥0.90 | 50 |
| φ24/8 | 1 | ≥24.0 | ≤8.0 | ≥1.00 | 50 |
| Φ39/13 | 1 1/2 | ≥39.0 | ≤13.0 | ≥1.25 | 50 |
Product Categories : Single Wall HeatShrink Tubing
